So yesterday evening i did a bit more on the A35 build. First i mounted up the old A3 stator. This will have to do until i can get hold of an HPI CDI in the new year. Next i set the timing as best i could with my old timing gauge i marked TDC with a black line and the firing point with a red dot. The A35 flywheel cover had a few bits missing so ive re-used the one from the A3 and i was surprised to find that it lined up. Next i mounted the engine back on the frame and installed the carb and hooked up the fuel line. Finally i fitted the Homoet pipe so all thats left to do now is to fit the chain and foot pegs. Hopefully it will start!
No comments:
Post a Comment