A moped blog

Mopeds at Dawn is a collection of photos, videos and information on mine, and other peoples classic mopeds.

"Welcome to M.A.D, we hope you enjoy the blog and welcome any feedback. Please don't hesitate to contact us."

Saturday, 20 July 2013

Tomos sealed bearing conversion

Today I thought I would start on building up the new rear wheel by installing sealed bearings. (Bearings are 6201 12mm x 32 x 10mm) This should hopefully give me less rolling resistance. After id popped out the old bearing cups I cleaned where the new bearings would go and heated it up with a heat gun to expand the metal. Once the centre of the wheel was nice and hot the bearing slipped in nice and easily.
Nexted I installed a new 20t rear sprocket with new bolts but I still need to get hold of some locking nuts.

No comments:

Post a Comment