An investigation into my first gear clutch problems.

Ok today after a month of not doing anything to do with mopeds i decided at last it was time to investigate why my first gear clutch stopped engaging in my tomos.

So i pulled the clutch cover. I was expecting the surfaces of the clutch to have lost its coating but when i removed the first gear clutch its surface was like new.

After some further investigation i found that the clutch has three pins that keep it aligned see No.7 on the next picture.

 
All three of these had snapped in half allowing the clutch to spin freely.

So it turns out all i need to repair the clutch is three new ones. But where from? Hmmm..........