New dremel tips!

Sinclairio noticed these is our local lidl for only £5 so of course i had to get a set.

Ball joint separator!

Picked this up this morning as i think it will be useful for separating the bearings from the crankshaft.

Gurtner idle problems

So i did a bit of research and came across this page that has an explanation as to why the Carb won't idle. Its all do with the idle pathway being tiny and getting blocked. It needs to be drilled out with a jewellers drill. So will see if this solves the problem.

Cleaning Gurtner Carb

Im still struggling to get the Peugeot to idle. So i thought i would take the Carb off and give it a clean.

Almost ready to case match!

So I've removed the bearings and seals from the two A35 crank case halves and bolted them back together in preparation to to case match them to my Airsal 70cc cylinder. Just need to removed the cylinder carefully from the A3 motor and borrow Sinclairio's dremel.