Now that ive finished building the new rear wheel with sealed bearings and 20T sprocket. I thought it upgrade the stock 26T front sprocket to either a 31T or 28T. The 31T wouldnt fit as the chain rubbed on the flywheel. It'll have to wait until I upgrade to hpi which has a smaller flywheel. I installed the 28T sprocket and flywheel cover. I had to make a new kickstart stop as the old one broke. So its ready for a test ride and then I'll start to build up the new front end.
If your the 15,000 viewer, thank you for viewing but check the count and post a reply. Cheers n gone
Sinclairio
After years of missing about with an old brake cable I thought I'd treat the Puch to £6 a new cable. "Why didn't I do it earlier....?"
The intake was bought from YVPS the least catch'iest name of a Moped online stores. The site is shocking couldn't put a decent description of any of the items. So with that in mind I had to blind buy something as I had no idea what size it wad going to be. It turns out it's a 19mm internal for a 19mm Dellortto PHGB. Luckily cookson has a 17 & 19. So gotby to strap a 19 on it and update the carb from the stock Bing to the 19mm Dellorto.
Molly Rose has joined the clan. Congratulations to Sinclairio and his wife Donna shes a beauty!
